3M Trizact Finishing Belt Pack
Includes each of the following: A100-180G, A65-220, A45-400, A30-600.
The 347FC Trizact belt, made by 3M in the USA is our absolute favourite steel finishing belt. We're very excited to be the first supply house to offer it to blacksmiths and bladesmiths.
They're Trizactly what you need to cut down on hand sanding time, by leaving the grinder with the best surface finish possible.
This sample pack includes one of every grit we offer. A100-180G, A65-220, A45-400, A30-600.
The 347's are the big brother to the 337's that are popular in the blade-smithing community, these boys not only cut faster and last longer, but you can use them wet, unlike the 337's.
Please note, these belts sadly only ship to USA destinations.
The abrasive grain also holds up to much more aggressive applications, such as profiling grinding, without cutting tracks into the belt. We're confident that you'll love these belts for finishing your bevels just as much as we do.
The Johnny 5 Knife and a 400 grit A45
Trizact abrasives last 2-5x longer than conventional abrasives, so though they cost more than other abrasives, they end up being very economical in the long run. Due to the Macro-replicated abrasive structures, which cut faster, and have leave a consistent finish throughout the belts life, these belts last much longer than most. The geometric bricks wear evenly, and help reduce swarf buildup, as well as slowing down loading up and glazing over.
The belts will load up however, and begin to feel "duller" when cutting, you can give new life to the belt by simply running a wire brush over the surface to clean it off!
A chunk of the billet used for the Zweihänder after being finished with an A45-400 grit Trizact belt
You might also like...
Aluminum Oxide Flexy Belt
9x11" Rhynowet Redline
3M Rugged Comfort Quick Latch Respirator (No Filter)
You as the purchaser of the product are acknowledging the risks involved and accepting full responsibility for injury and damages related to its purchase and use. You are therefore releasing our company, employees and representatives from any and all liability related to its use.
Always wear eye protection when using abrasives and never grind without respiratory protection. The dust produced is extremely dangerous to inhale. Abrasive belts pose a risk of entrapment in machines so care should be taken to never touch a body part to a belt with power to the machine to save losing a finger or cutting one off.