Small Wheel Attachment

Small Wheel Attachment
Small Wheel Attachment
$105.00

Our small small wheel attachments are the perfect companions to any of our belt grinders, as they make cutting in perfect, tight curves a breeze! They come in two sizes, the 1" and 3/4" rubberized wheels, and the 1/2" rubber and 1/4" steel wheels.

The rubberized wheel makes for a nicer grinding experience than raw steel, by giving a small amount cushioning, and helping reduce the felt "belt bump'. The 1, 3/4 and 1/2" are all rubber coated, and the 1/4" is raw steel. We don't recommend using belts coarser than 80 on the small wheel attachments, as the tight radius promotes grit shedding on the lower grit belts.

ATTENTION: to use the Small Wheel Attachment on a 2x72 Steele Grinder you must have the Small Wheel Idler Arm.

This product sadly only ships within the USA.

The 1/2" x 1/4" on a 2x48 Steele Grinder running a Cubitron II 984F belt

These wheels, due to the small bearing size, need to be run at a much slower speed than most other attachments, we recommend running them at a max speed of "20" on the KBAC VFD's that come with our grinders. If you're seeing sparks coming off the small wheels, they're being run too fast, and should be slowed down to avoid damaging the bearings.

The 1/2" x 1/4" and the 1" x 3/4"

The 1" x 3/4" are excellent for finger groves and rock texturing handles, as well as grinding in fullers.

The 1/2" x 1/4" are perfect for getting into the tight corners on guards and coils, as well and cutting into other tight areas.

The 1/2" x 1/4" on a 2x72 Steele Grinder running a Cubitron II 984F with a Small Wheel Idler Arm

You might also like...

Small Wheel Idler Arm
Small Wheel Idler Arm
Small Wheel Idler Arm
Small Wheel Idler Arm

Small Wheel Idler Arm

3M Trizact Finishing Belt
3M Trizact Finishing Belt

3M Trizact Finishing Belt

3M Cubitron 984F II Ceramic Belt
3M Cubitron 984F II Ceramic Belt

3M Cubitron 984F II Ceramic Belt

The 1" x 3/4" are excellent for finger groves and rock texturing handles, as well as grinding in fullers.

WARNING

Please be warned. Using these products can be extremely dangerous and can cause serious bodily harm.

You as the purchaser of the product are acknowledging the risks involved and accepting full responsibility for injury and damages related to its purchase and use. You are therefore releasing our company, employees and representatives from any and all liability related to its use.

Do not under any circumstances operate the equipment without training, eye, ear and respiratory protection. Do not manipulate adjustments or change belts with the machine powered. Do not make modifications to the equipment or use power different than specified.