Small Wheel Idler Arm

Small Wheel Idler Arm
Small Wheel Idler Arm
Small Wheel Idler Arm
Small Wheel Idler Arm
$109.00

This idler arm gives you the ability to have a much tighter workpiece fit into a small wheel attachment by bringing the belt to a more acute angle. It is not necessary for running small wheel attachments on our 2x48 grinder but, but you do need it for a 2x72. These give you a lot more options in terms of where your small wheels will fit.

This product sadly only ships within the USA.

The 1/2" x 1/4" on a Small Wheel Idler Arm running a Cubitron II 984F

These wheels, due to the small bearing size, need to be run at a much slower speed than most other attachments, we recommend running them at a max speed of "20" on the KBAC VFD's that come with our grinders. If you're seeing sparks coming off the small wheels, they're being run too fast, and should be slowed down to avoid damaging the bearings.

The 1/2" x 1/4" on a 2x48 Steele Grinder without an idler arm.

This idler arm gives you the ability to have a much tighter workpiece fit into a small wheel attachment by bringing the belt to a more acute angle.

The 1/2" x 1/4" on a 2x72 Steele Grinder running a Cubitron II 984F belt and the Small Wheel Idler Arm

You might also like...

Handle Broach
Handle Broach

Handle Broach

$35.00
3M Trizact Finishing Belt
3M Trizact Finishing Belt

3M Trizact Finishing Belt

3M Cubitron 984F II Ceramic Belt
3M Cubitron 984F II Ceramic Belt

3M Cubitron 984F II Ceramic Belt

The 1" x 3/4" are excellent for finger groves and rock texturing handles, as well as grinding in between turkey fork tines.

WARNING

Please be warned. Using these products can be extremely dangerous and can cause serious bodily harm.

You as the purchaser of the product are acknowledging the risks involved and accepting full responsibility for injury and damages related to its purchase and use. You are therefore releasing our company, employees and representatives from any and all liability related to its use.

Do not under any circumstances operate the equipment without training, eye, ear and respiratory protection. Do not manipulate adjustments or change belts with the machine powered. Do not make modifications to the equipment or use power different than specified.